Contact Us
400 Phone Number:+864001078007
Contact number:+8615010482279
Email: 15010482279@139.com
Company Address: Room 1001, Unit 4, Building 1, No. 69 Chaoyang Road, Chaoyang District, Beijing
PE1437
- Commodity name： PE1437
Email:
15010482279@139.com
- Product Description
-
Pulse Eddy Current Flaw Detector
PEC Pulse Eddy Current Probe / Submersible IP68-Rated Probe with High Lift-Off and High-Power Capability / Probe-to-Material Measurement Gap Up to 80 mm
Multi-layer protective coating provides an intuitive A-scan and C-scan inspection interface for detecting defects in the base material wall thickness of corrosion-resistant pipelines.
PE1437 can detect corrosion areas in steel objects without any surface preparation. There’s no need to remove scale, dirt, paint, or other coatings—up to 80 mm of accumulated scale or paint can be detected.
Application
PE Insulated Pipe Measurement
Heat exchange pipeline
Corroded pipeline
Streetlight pole
Ship Inspection
Features
- This device features a small probe size, allowing it to operate on small objects for precise defect detection. It can detect even the smallest defects, including flat-bottomed holes as small as 20 millimeters in diameter—provided the depth of the flaw is no more than 5% of the nominal material thickness.
- The device features a bright display that shows the measured thickness, as well as A-scan and C-scan images.
- The monitor is protected with impact-resistant glass.
- This probe features an IP68-rated housing, making it suitable for underwater use.
The device features a shockproof casing and comes equipped with a host protective case, probe, charger, and the main unit itself.
Parameter Preview
Steel thickness measurement range (applicable to PEC143702)
0...12 mm
Steel thickness measurement range (applicable to PEC143703)
0...18 mm
Average Thickness Measurement Error
5%
Insulation Coating Thickness Range (for PEC143702)
0..60mm
Insulation Coating Thickness Range (for PEC143703)
0...80mm
The minimum diameter of the pipeline being tested
25mm
The temperature of the metal in the test object
-20°C···+100°C
The temperature of the housing surface within the sensor placement area
-20°C to +60°C
The range of working environment temperature
-20···+50°C
Continuous operating time without recharging
8 hours
Cable length
1.5m
Dimensions
232 x 135 x 44 mm
Device weight
0.8kg
Keywords:
Honorary Qualifications
Frequently Asked Questions
Can't charge the device?
The device may have been left unused for too long, causing the battery to lose charge. You can try charging it for an extended period. If there’s still no response, we recommend sending it in for repair. Also, please use the dedicated charger provided for each device when charging.
Can't connect the thickness gauge's flat plate to the instrument?
First, turn on the tablet’s hotspot and check whether the eight-digit number in the hotspot name matches the eight-digit SN code of the device. If they don’t match, make the necessary adjustments. Then, follow the instructions in the manual to connect the tablet. If you’re still unable to proceed, we recommend contacting customer support for assistance.
How can I fix the issue of fluctuating readings during thickness measurement?
It is recommended to connect the flat plate during the thickness measurement process and observe the waveform. If the waveform appears poor, switch to manual mode for inspection. If no consistent waveform is detected, consider potential material issues or probe damage—replace the probe and try again. If no waveform still appears after replacing the probe, the material itself may be of poor quality, making it unable to generate an effective signal.
Get a quote
*Note: We will contact you within 1 business day. Please check your email at 15010482279@139.com.
Beijing Precision Testing: Crafting High-Quality Testing Services for You
400 Phone Number:+864001078007
Contact number:+8615010482279
Email: 15010482279@139.com
Company Address: Room 1001, Unit 4, Building 1, No. 69 Chaoyang Road, Chaoyang District, Beijing
WeChat：
E-mail：
Telephone：
Telephone：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 4
图片alt标题设置： Beijing Accurate Testing Technology Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Materials are currently being organized—stay tuned!
CSS / JS 文件放置地